Ads by Google
Specifications
These small heaters are designed to prevent condensation and to ensure a minimum operating temperature in small enclosures.
Semiconductor fan heaters prevent the formation of condensation and ensure an even temperature in switch and control equipment. The built-in regulator is used to set the desired temperature.
Technical Data
| Heating element | PTC resistor, temperature limiting |
| Temperature safety cut-out | to protect against overheating in case of fan failure, automatic reset |
| Axial fan, ball bearing | Airflow see table |
| service life 50,000h at 25°C (77°F) | |
| Connection | 2-pole clamp 2.5mm², clamping torque 0.8Nm max |
| Casing | plastic according to UL94 V-0, light grey |
| Optical indicator | thermostat control lamp |
| Connection | 2-pole clamp 2.5mm², clamping torque 0.8Nm max. |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Fitting position | vertical airflow (air outlet up) other fitting positions possible |
| Dimensions | 100 x 128 x 165mm |
| Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
| Operating / Storage humidity | max. 90 % RH (non-condensing) |
| Protection type/Protection class | IP20 / II (double insulated) |
| Approvals | UL File No. E204590 |
| Art. No. | Operating voltage | Heating capacity (50Hz)* | Heating capacity (60Hz)* | Inrush current max. | Pre-fuse T (time-delay) | Airflow, free flow | Setting range Temperature regulator | Weight (approx.) |
| 02700.0-00 | 220-240VAC, 50/60Hz | 475W | 550W | 11.0A | 6.3A | 35m³/h | 0 to +60°C | 0.9kg |
| 02701.0-00 | 220-240VAC, 50/60Hz | 550W | 650W | 13.0A | 8A | 45m³/h | 0 to +60°C | 1.1kg |
| 02700.9-00 | 100-120VAC, 50/60Hz | 400W | 550W | 14.0A | 8A | 35m³/h | +32 to +140°F | 0.9kg |
| 02701.9-00 | 100-120VAC, 50/60Hz | 510W | 650W | 15.0A | 8A | 45m³/h | +32 to +140°F | 1.1kg |
| *at 20°C (68°F) ambient temperature |
Fan Heater CR 027