Thermal Protector for Electric Water Heater
The WKI Thermal Protector shown in the picture below is a key part in the electric water heaters. It could be made to control temperature from 85 degree Celsius to 135 degree Celsius. Copper-made capillary/sensor is sensitive to the change of temperature, which responds to the action of switch accurately. The DPST contacts open on temperature rise. Noted it is a Manual-reset Thermal Protector that suits the Electric Water Heater.
Features of Thermal Protector for Electric Water Heater
Comply with the UL,CE,RoHS,CQC,ISO regulation.Special design made for electric water heaterTemperature-preset typeManual-reset designLong life usageCreep Action SwitchSpecifications of Thermal Protector for Electric Water Heater
Temperature Range | 85°C ~ 135°C |
Length of Capillary | Standard: 400mm |
Material of Capillary | Copper |
Diameter of Sensing Bulb | 3mm |
Electric Rating | 20A-250VAC
|
Wiring Diagram | Double Pole Single Throw (DPST) |
Material of Terminal | Brass |
Size of The Nut | 1-M10 |
Min. Capillary Bend Radius | 5mm |
Temperature Rate of Change | 0.8°C/min |
WKI Thermal Protector can be made upon your desired specifications. Please don't hesitate to contact us with your inquiry, and we will always help you with it.
There are other Capillary type Thermal Protectors available for your appliances. We will send you more technical information based on your inquiry, as soon as we get the contact from you.
Thermal Protector for Electric Water Heater