Welcome to ECVERY
performed splices and joints
performed splices and joints
Supplier Info
[China Supplier]
Contact Person : Ms. Ma Caroline
Tel : 86-311-85965666
Fax : 86-311-85963666
Product Detail
performed splices and joints,splices and joints ISO 9001:2000 grip strength 95% RTS resist-vibration OEM

performed splices and joints,splices and joints1.Usage:include jumper splice rod and all tension splice rod.2.Features:a. stress well-proportioned, grip strength not less than 95%(RTS)b. good corrosion c. install easilyd. better resist-vibratione, this clamp turning direction is right, if left, please note it in the contractf the clamp can’t be installed in the link fitting which is rotated by the axis.

Order Notice:

1.different specification clamp can’t be insteaded.                                                                                                            2.suggest to use one time after the clamp afford full strain3.it must install by professional trained staff.                                                                               

4. before installing,please polish the conductor wire,remove oxide,and then coat the conductive grease.   

5.be caution:lightning stroke around the circuit. 

performed splices and joints

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.