1.100mW,up to 300m 2.used for AMR Automatic Meter reading,Wireless Dishes Order System 3.433/868/915MHz 4.Good sensitivity

JZ863:RF modules

Serial number	Item	Parameter	Note
1	Modulation mode	FSK
2	Work frequency	433MHZ	Capable of 315/868/915mhz
3	Transmission power	<100mW
4	Transmitting current	<100mA
5	Receiving current	<10mA
6.	Sleeping current	<1uA
7	Receiving sensitivity	-110dbm(1200bps)
8	Channel amount	8 channel	User setting
9	Working temperature	-20+65	°C
10	Working humidity	10%~90%(relative humidity without condensation)
11	Antenna impedance:	50
12	Power supply	TTL: DC+2.8V+3.6V or 3.6V+5.5V,	RS232/RS485: +5V±0.5V
13	Dimension	44mm×27mm×8mm
14	Interface	TTL, RS232, RS485
15	Reliable transmit distance	300-500m

Features:

1.Power and receiving sensitivity The transmission power is <10mW, Receiving sensitivity: -110dbm,Transmission current<100mA, Receiving current<10mA, sleeping current <1uA.2. Modulation mode and Frequency Modulation mode: FSK, Frequency: 433mhz. Also capable of 315mhz, 868mhz and 915mhz.3. High anti- interference and low BER(Bit error Rate)Based on the FSK modulation mode, the high- efficiency forward error correction channel encoding technology is used to enhance datas resistance to both burst interference and random interference and the actual bit error rate of 10-5 ~ 10-6 can be achieved when channel bit error rate is 10-2.4. Long transmission distance Within the range of visibility, the reliable distance isBER=10-3/1200bps >500m when the antenna is higher than 200m (BER=10-3/9600bps). 5. Transparent data transmission Transparent data interface is offered to suit any standard or nonstandard user protocol. Any false data generated in the air can be filtrated automatically (What has been received is exactly what has been transmitted). The change time between receiving and sending is <10ms. 6. Multi- channelThe standard JZ863 configuration provides 8 channels to meet the multiple communication combination mode of the user.7. High speed wireless communication and Large data buffer zone When the RF baudrate is bigger than COM baudrate, allowing to transmit unlimited length data at one time, when the RF baudrate is smaller or equal to the COMs, allowing the transmission of 255 Bytes data . 8. Intelligent data control and the user doesnt need to prepare excessive programs Even for semi duplex communication, the user doesnt need to prepare excessive programs, only receiving/transmitting the data from the interface. JZ863 will complete the other operations automatically, such as transmission/receiving conversion in the air, control, etc.10. High reliability, small and light Single chip radio - frequency integrated circuit and single chip MCU are used for lessened peripheral circuits, high reliability, and low failure rate. 11. Watchdog monitor Watchdog monitors the inner function, it changes the traditional product structure and also improve the reliability of our modules.

Application Scopes:

* AMR Automatic Meter Reading

 * Wireless alarm and security systems

 * Home automation

 * Low power telemetry

 * Wireless conference voting system;

 * Sports training & competition;

 * Wireless dishes ordering;

 * Wireless POS, PDA wireless smart terminal;

 * Electronic bus station and intelligent traffic;

 * RF transmitter Wireless electronic display screen and queuing machine;

 * Wireless telemetry charging for parking, parking lot;

 * Wireless modem Automobile inspection and four-wheel orientation;

 * Wireless sensor Industrial wireless remote control and air conditioning remote controller;

 * Observation and predication of oil well and hydrological information;   * Point to multi-point wireless network, wireless on-the-spot bus and automatic data collection system 

RS232/RS485/TTL Wireless Communication Module JZ863