wire bunching machine
Main parameters
1 diameter of the bobbins: 400MM
2 bobbin size:400*300mm
3 production scope: 2.5MM2
4 monofilament dia: 0.05-0.28MM
5 RPM: 3000
6 motor: 4.0KW
a)Max bobbin size(diameter×length)(mm): φ500×300
b)Max cross section: 2.5mm2
c)copper wire dia scope(mm): 0.1~ 0.28
d)Pitch scope(mm): 4.06 ~ 31.31
e)stranding direction: “S” (left) or “Z” (right)
f)rotary speed(r/min): 0 ~ 1500,stepless adjustable
g)rotary material: spring steel tape
h) conductor device on the rotary: porcelain eye
i)Motor: 5.5kW AC control
j)torque motor take up: manual regulation friction type
k)bobbin lifting: manual-hydraulic type
m)electrical control plate: standard electrical equipment
n) host bearing: mainly adopts Japan brand NSK
o)Height between the main axle and ground(mm): 575
p)size of the machine(length×width×heigth)(mm): 2420×1230×1260
q)Net weigth(kg): 1700
r)Electricity: 380V,50Hz
s)the horizontal height of the machine: ≤1000m
t)The environment temperature: ≤40°C
u) Inlet direction: inlet wire from right side
wire bunching machine