Welcome to ECVERY
Front single sequin device( bearing type)
Front single sequin device( bearing type)
Supplier Info
[China Supplier]
Contact Person : Mr. Zhang Paul
Tel : 86-577-86139880
Fax : 86-577-86139886
Product Detail
1The sequin device can run 3mm,5mm,7mm,8mm,9mm sequins. 2The engine motor can be 0.5A or 1A 3The device is installed in front

 Model : DB-JP-02   C  (pressure spring locking  type)

(1):Use funtion

        1.It adopts the combination of straight bearing,guiding rod shaft and pneumatic element to control up and down of device

        2.The special steel guide groove can change the specification between different blades easily,which just changes the passing groove

        3.The use of flat sequins and concave sequins will achieve the best effect

       4.The device is installed in the front(the initial needle position or the end needle position)

(2):Technical parameters

       1.Space of sequin device: 50mm

       2.Lifting traveking: 70mm

       3.Sequin embroidery speed:

           ¢ 3mm --- 4mm --- ¢ 5mm            1000 r / min

          ¢ 6.75mm----- ¢ 9mm                     800 r / min

       4.Specification of sequin: ¢ 3mm, 4mm, ¢ 5mm, ¢ 6.75mm, ¢ 9mm

       5. Specifications of stepping motor: 0.5A or 1A 

       6.The use of air pressure: 3kpa

Front single sequin device( bearing type)

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.