Ads by Google
Infusion Pump IP300
High accuracy infusion pumpAvailable for all kinds of IV setsCan used for neonatalFlow rate from 1ml/h to 1300ml/hCE,ISO
Specifications
1. Patient type: Adult, pediatric and neonatal
2. Driven mode: Electrical motor driving
3. Applicable for all IV sets
4. Flow rate: 1mL/h~1300mL/h
5. Preset volume range: 1mL~9999mL
6. Accumulated infusion volume display range: 1mL~9999mL
7. KVO (keep vein open):
1mL/h ≤flow rate ≤5mL/h, KVO rate is OFF
5mL/h <flow rate <50mL/h, KVO rate is 1mL/h
50mL/h ≤flow rate <300mL/h, KVO rate is 3mL/h
300mL/h ≤flow rate ≤1300mL/h, KVO rate is 5mL/h
8. Flow rate accuracy:
±5% (specified IV set)
±10% after calibration (ordinary IV set)
9. Bolus rate: Five patterns:
600mL/h, 700mL/h, 800mL/h, 900mL/h, 1000mL/h
10. Air sensor sensitivity: ≥0.015mL
11. Occlusion detector sensitivity: Adjustable in 5 levels
0.04MPa ±30%
0.06MPa ±30%
0.09MPa ±30%
0.12MPa ±30%
0.15MPa ±30%
12. Alarms: Internal fault, Low battery voltage, AC failure, Door open,
Occlusion, Air in line, Empty, Heat malfunction, Interrruption of the AC power supply
13. Alarm volume: ≥65dB (A)
14. Pump running noise: ≤50dB (A)
Power Supply & Battery
Inner battery: Ni-MH 9.6V AA 1500mAh, Operating ≥4 hours after full charge
Power source: AC 100~240V, 50/60Hz; DC 15V
Power consumption: ≤15VA
Classification & Safety
Classification: Class I; Internal power supply; type BF; IPX1
Electric security: IEC 60601-1
Security: IEC 60601-2-24
EMC: IEC 60601-1-2
Storage & Operation Condition
Storage:
Temperature: -20~55°c
Relative humidity: ≤93%
Atmospheric pressure: 50KPa~106KPa
No exposed to corrosive gases, stored in well ventilated room
Operation:
Temperature: 5~40°c
Relative humidity: 20~90%
Atmospheric pressure: 70KPa~106KPa
Altitude: 4000m below
Dimension & Weight
Dimension: H245xD180xW170mm
Weight: ≤3kg
Accessories & Document
Power calbe
User Manual
OptionalHeating function
Trolley
All Kinds of IV Sets Infusion Pump IP300