Booster Cables / Jump Lead / Jumper Cables
Type and Size C8101 Booster Cables 200A 1.8m x 8mm
Shipping Ctn size: 46x35x23.5CM Quantity per ctn: 20PCS/CTN Gross weight: 12 KGS/CTN Net weight: 11 KGS/CTN 14,000pcs/20 FCL
C8102 Booster Cables 500A 2.5m x 12mm
Shipping Ctn size: 54x50x29CM Quantity per ctn: 10 PCS/CTN Gross weight: 18 KGS/CTN Net weight: 17 KGS/CTN 3,600pcs/20 FCL
Make sure both cars are not touching and ignition switches are ignition switches are turned off.
2) Connect one end of the cable with the red clamp to the POS. ( ) post of the good battery and the other red clamp to the position of the dead battery.
Connect the black clamp of cable to the NEG. (-) post of the good battery and the other black clamp to the frame bumper or engine block of the car with the dead battery. (Do not connect directly to the NGE, post of the dead battery). Make sure clamps from one cable do not accidently touch the clamps of the other cable.
After the engine of the car with the dead battery is running. disconnect the cable clamps in the reverse order of (2) & (3)NOTE: This method is for use with NEG. ground batteries only.
WARNING: Keep sparks, flames and lighted cigrettes away from batteries. Check water level of battery before jump starting. If water is not visible or is frozen. Do not jump start. Batteries only of the same voltage should be jump started.
DANGER: Lead-acid type batteries contain sulfuric acid. Contact with skin. eyes or clothing should be avoided. Antidote. External flush eyes with water for 10 minutes. Internal-drink large amounts of water or milk and contact physician immediately.
C8102-C Booster Cables / Jump Lead / Jumper Cables