Ads by Google
Wood carbonization furnance
Introduction:
The whole gas flow type include the outer stove, three set of inner stoves , and the 3ton hoisting tools.
When one inner stove have been finished carbonization, we will use the hoisting tools hoist the inner stove from the outer stove, then let the inner stove natural cooling, at the same time, we can put another inner stove into the outer stove, which will save a lot of cooling time, so the productivity effect increase a lot, it is the ideal choice for mass production of charcoal.
Features
1 Easy operate and maintain, higher safety, energy saving
2 High carbonization rate ,no smoking, little pollution, high efficiency
3 Newly developed carbonization stove, which can dry the materials with the superfluous energy produced in the process of carbonization. 6,8 hours per stove and can work continuously
4 The tube of fume extraction will recycle the gas flow which come from the inner stove during the carbonizing process for continue warming the stove, and it will save 70% energy consumption and recycle 95% smoking
Parameter:
Model No. | SLC-2-1 | SLC-3-1 | SLC-2-2 |
Productivity(kg) | 1-1.5t/24h | 1-1.5t/8h | 1.5t/24h |
Carbon temperature(°C) | 430 | 430 | 430 |
Motor power sum(kw) | 1.5 | 1.5kw | |
Weight(kg) | 4800 | 4500 | 6000kg |
Dimension(mm) | 2800*1800*2500 | 3000*1300*2200 | 3070*1800*2800 |
technology data
Power | No power |
Temperature | 600’C |
Environment | Totally No pollution ( there are two reasons : the frog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again 2. We install a special device that can use the liquid gas as the energy to heating the carbonization kiln, and it will not produce any smoke. |
Time | This type have three inner stove, when one inner stove finished (6- 8hours ) , use the hoist tools lift the inner stove out let it cooled naturally, at the same time, lift the other one in , 3 inner stove can work continuously. 24 hours can carbonizing 3-4 inner stove |
Raw material of the Outer stove and inner stoves | The raw material of outer stove is heat resistant steel plates and heat preservation refractory materials; the inner stove is the heat resistant steel plates and special steel boiler plate. And the steel plates thickness is 6mm |
Transport | The three inner stove can be stack in the outer stove together, save a lot of space, |
energy consumption | 20-30kg firewood or 15kg liquid gas .This type will save 30% payment |
some questions:
ASK: 1. How does carbonization stove make charcoal?
Answer:
The surface of wood (bamboo, wood briquette, nut shell, etc) will ignite spontaneously in the hypoxic condition. And this spontaneous combustion will produce heat. This heat and the external heat source will heat the stove at the same time, when the temperature reach 280 degree, the chemical structure of the wood will be changed by the high-temperature, and after long time heating, changing and decomposing, then we will get the black charcoal, combustible gas, and wood tar. This model furnace will use the fume extraction tube to recycle all the combustible gas and smoking from the entire heat source.
2.Why it is no pollution ?
Answer:
1. Smoking purification system are used for purify the smoking (can not burning) and filter the wood tar. The smoking through the purification system will become water vapor, and it will not pollute the air.
2. When during the process of carbonizing, there will be some smoke.(can be burning) the smoke can return to the furnace through tube for purifying, after purification , the combustible smoking can be flow into the heating room of the main furnace for heating the stove again,
Product show:
Any question or needs there,please feel free to contact me.
environmental lifting airflow carbonization stove008615838061376