BPY96 Series Explosion Proof High Efficiency Energy Saving Fluorescent Fittings(IIC,DIP)
Application1 Designed for |
Explosive atmosphere Zone 1 , Zone 2 |
Combustible dust zone 20,Zone 21, Zone 22. |
2 Designed for Groups IIA,IIB,IIC. |
Temperature classes T1~T6. |
3 Varity types are available. |
4 Tube options: T5 Bi-pin fluorescent tube,T5 Bi-pin LED tube. |
5 Designed for petroleum exploitation, refinery, storage, chemistry, medicine ,military and military facilities |
etc. site with potential explosive atmosphere. |
Technical Specification
1 Compliance with:GB 3836.1,GB 3836.2,GB 3836.3,GB 12476.1,IEC60079-0,IEC60079-1 |
2 Explosion Protection: ExdeIICT6/DIPA20TA, T6 |
3 Rated Voltage: AC 220V |
4 Tube options: T5 Bi-pin fluorescent tubes(1*14W,2*14W,1*21W,2*21W,1*28W,2*28W) |
T5 Bi-pin LED tubes(1*8W,2*8W,1*15W,2*15W) |
5 Ingress Protection:IP66 |
6 Corrosion Resistance:WF1 |
7 Cable Entries specification:2-G1/2 |
8 Cable’s outer dia.:Φ6mm~Φ10mm |
9 Charging time ≤24h |
10 Emergency starting time:≤0.3s |
11 Emergency lighting duration: ≥120min |
Model | Tubes | Power (W) | Luminous Flux (lm) | Ballast Types | Lamp holder | Explosion Protection | Ingress Protection |
BPY96-1×14 | T5 Bi-pin fluorescent tube | 14 | 1050 | Electronic ballast | G5 | ExdeIICT6 DIPA20TA,T6 | IP66 |
BPY96-2×14 | 28 | 2100 | |||||
BPY96-1×21 | 21 | 1750 | |||||
BPY96-2×21 | 42 | 3500 | |||||
BPY96-1×28 | 28 | 2400 | |||||
BPY96-2×28 | 56 | 4800 | |||||
BPY96-1×8 | T5 Bi-pin LED tube | 8 | 640 | Electronic ballast | |||
BPY96-2×8 | 16 | 1280 | |||||
BPY96-1×15 | 15 | 1200 | |||||
BPY96-2×15 | 30 | 2400 |
1 Enclosure is die casted of aluminium alloy, high voltage electrostatic powder coated after shot blasted. |
2 High strength toughened glass cover. |
3 Exposed fasteners are of stainless steel material. |
4 Guards is treated of dip with reliable corrosion resistance. |
5 Tube options of T5 Bi-pin fluorescent tube and T5 Bi-pin LED tube. |
6 T5 fluorescent tube with features of high lighting efficiency, long service life(20000h)and good colour rendition (Ra>85). |
7 Electronic ballast with high power factor cosφ≥0.95. |
8 Modular plug-in structure. only need to disconnect end cover and draw out core to change tubes. |
9 Fittings with emergency unit is in integral structure east to install and save mounting room. |
10 Fittings with emergency unit will automatically shaft to emergency lighting model when normal power failure |
11 Special designed over charging, over discharging protection circuit inside emergency unit. |
12 Lighting sources compartment is of spigot and cementing compound explosion proof structure, connecting compartment is of increased safety structure. |
13 Internal and external earthing studs to ensure reliable earthing. |
14 Steel conduit or cable wiring. |
.
Mounting methods and dimengsionsBPY96 Series Explosion Proof Energy Saving High Efficiency Fluorescent light(IIC,DIP)