Energy Saving Fluorescent Induction “Tube in Tube”
---Best Replacement of T8 florescent tubes
(1) Features
1. Ballast cooling device: well-designed cooling device made of aluminate alloy could eliminate heating during ballast’s working, so that protect the ballast from affecting its function and lifespan.
2. Electronic ballast: using imported electronic component and sophisticated electronic circuit, build-in high low pressure starter. Electrify one side or two side. Now for G4, we have CHIP Ballast.
3. Two ply reflector: the aluminate alloy reflector by specail process could enhance the brightness effectively.
4. Tube light with pure tri-phosphor fluorescent powder: the tube using the pure tri-phosphor powder dedicated to electrodeless light protect the lighting quality of tube light fundamentally.
5. Invariable temperature and explosion proof glass tube: the exterior tube make the tube work in invariable temperature, safty, moistureprodf, explosion proof and stable environment. Procting the tube from effect of exterior climate.
(2) Advantages
1. High Techonology East Lighting tube in tube are advanced high tech products using pure tri-phosphor powder dedicated to electrodeless light, safety isolation protection system and heat dissipation material.
2. Save energy efficiently East Lighting tube in tube (20W) replace inductive T8 tube light 40W(real power:45W). Save energy 53%. Enhance brightness 30%. Power factory up to 0.98. convert efficiently between electric energy and luminous energy.
3. Long life span Using advanced integrated circuit electronic control technology and luminour driver.Improve and process the tube light specially to make the tube work in the environment of invariable current, voltage and temperature. Special parameter and structure make the life span of tube up to 16000hours, which is 2.5 times higher than existing T8 fluorescent light, and 2 times higher than T5. Now, for G4,the lifespan is 20000-25000hurs, which is marvelous!
4. High Colour Rendering Properties CRI: Ra 87, light is similar to daylight and soft. Quick start, no strobe. Eliminate light pollution, protect eyes effectively. There is two ply reflector by specail process in the tube light, which reflect the light in useless angle to effective irradiation field,so that increase the illuminance.
5. Low Heat Hight luminous efficiency. Descrease the environment temperatuer effectively and reduce the cost of aircondition for coolling, as the tube work in low invariable temperature (below 40°C).
6. Environment friendly Special design: double tube.With the protection of exterior tube, harmful substance will not leak when inner tube is broken. It will not pollute air and easily recycling.
(3) “Tube in Tube” SERIES---Save 50% energy,more
EL-11W-605mm | replace inductive T8 fluorescent ligh(18W~20W) |
EL-15W-915mm | replace inductive T8 fluorescent light(30W~33W) |
EL-21W-1215mm | replace inductive T8 fluorescent light(40W~43W) |
EL-28W-1515mm | replace inductive T8 fluorescent light(58W~60W) |
Color temperature: 2700K,3800K,4000K,6500K –For customers’ request |
(4) Comparison Test --
Left: Use normal fluorescent | Tube Right: Tube in Tube |
20 watt | 11 watt |
Actual Power consumption=24W | Actual ower |
Energy Saving Fluorescent Induction Tube in Tube