Ads by Google
GASKET MAKER
1.Product Description The product is a RTV & high temperature resistance siliocne rubber sealant , which is specially used in manufacture & repair of auto & machinery. 2.Product Characteristic Withstand temperature up to 650F(34C) The surface drying time is 10-20 mintues Suitable for all vehicles & make any gasket instantly Low volatile & valve covers Intake manifold Oil pump flanger Transmission Water pump 3.Packing 32gm alum blister tube , 12pcs/box , 12box/carton 4.Carton Size: 44.0 x 24.0 x 44.0 (cm)
Main Feature
Make Any Gasket Instantly
For All Vehicles
Low Volatile
Valve Covers
Intake Manifold
Oil Pump Flanger
Transmission
Water Pump
Type: Neutral , Acetate
Packing:85gm alum tube, 12pcs/box, 12box/carton
Carton Size: 52x 26x43cm
silicone gasket maker can make any gasket instantly, After curing, it resists cracking, shrinking & migration caused by thermal cycling. it can work up to 280º C ,good resistance of oil, water, anti-freeze and transmission fluid. So it's widely used to seal timing chain covers & other different covers. User's Guide: 1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease; 2. Remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size; 3. Apply continuous, uniform 1~6mm bead around perimeter of one surface. Completely surround all bolt holes; 4. Wait about 10 minutes for silicone to skin over. Then reassemble the parts. 5. Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond.
Notes: A) Leave thickness for gasket when reassembling. Don't over-tighten the bolts. B) Sealant releases acetic acid (vinegar-like odor). Use with adequate ventilation. C) Replace the cap after us
100%SILICONE GASKET MAKER valve cover sealants