1.Temp. range: room temp. +5~150C 2.Time: from 40C to 150C:<=30min 3.Temp. control discrepancy:+-0.1 4.Power:200W

The instrument consists of a base and stand assembly, sample holder and gas distribution system. Test tubes are held in a bolck . The gas at 5 to 10 psig passes through the distribution manifold. Depending on the test-tube size and solvent volume they can be individually raised or lowered to the correct height. Needles or glass pipets blow gas onto the surface of the solution resulting in rapid evaporation of the solvent. All materials used are laboratory quality and can withstand contact with organic solvents. Acid resistant models are available for corrosive application

Features1. High precision and wide range of temp control2. Blowing a large number of samples at one time3. Blowing each sample independently4. Amount of airflow can be adjusted5. Easy operation; safe and reliable to useSpecification1.Temp. range: room temp. +5~150°C2.Temperature control discrepancy: <= ±0.5°C (RT+5°C~150°C)                                                    <=±1°C (100°C ~ 150°C)3. Low Nitrogen consumption of 330ml/min/sample4. Time required for temperature to increase from 40°C to 150°C: <=30m minutes 5 .Maximum input power: 200W6. Temp. control discrepancy: ± 0.1°C7. Dimensions: 280W x240D x 500H8. Net weight: 6Kg9. All units will fit and are recommended to be used in a bench-top.ventiated hood10. Needles length: 80mm11. Standard Blocks: See "Blocks for MD200-1A"

 

Blocks for MD200-1A

 

Type	Parameter	Capcity	Dimension (mm)
BK19	0.2ml	96	78 x 114 x 26
BK20	Plate(no holes)	microplate	81 x 123 x 19

 

MD200-1A Sample dry Concentrator