Welcome to ECVERY
CT45 Mini Excavators (Hydraulic Crawler Excavator)
CT45 Mini Excavators (Hydraulic Crawler Excavator)
Supplier Info
[China Supplier]
Contact Person : Mr. Wang John
Tel : 0086-538-8417382
Fax : 0086-538-8418932
Product Detail
CT45 Mini Excavators (Hydraulic Crawler Excavator)

CARTER MINI EXCAVATOR (HYDRAULIC CRAWLER EXCAVATORS) SPECIFCATIONS

HYDRAULIC SYSTEM(JAPAN KYB)

CMMINS A2300T

Power 40KW/2200RPM, a guarantee of super power

Excellent performance even work in plateau or at high altitude

In conformity with the EU III emission control regulations

Imported hydraulic system with dual pump and dual circuit

Guarantee for 3 yrs under normal use and maintenance

Imported hydraulic components, Japan made KYB main pump, multi-circuit valve, swing motor, walking motor, South Korea made gasoline tank

On-line digital monitoring and control system

GPS satellite(optional)and remote diagnose system(optional)

Cold&warm air conditioner supply under different kinds of weather conditions

Light and handy pilot operating system

Rubber or steel pedrail

SPECIFCATIONS

Operating weight 4.200 KG     

Travel speed 4.4/2.7km/h

Bucket Capacity   0.17m3(SAE)      

Tracking force      34.1kn

Engine power       40KW/2.200RPM

gradeability   300(58%)

Swing speed 11RPM  

Bucket digging force   23.7 kn

Ground Pressure 38.7KPa

Arm digging force       20.4 kn

 Dimensions

Boom Length       2.650 mm

Arm Length   1.450 mm

Upperstructure width   1.600 mm

Undercarriage width    1.750 mm

Overall Height with cabinet       2.455 mm

Rear swing radius       1.600 mm

Clearance under counter weight      585 mm

Tumbler Distance 1.710 mm

Ground clearance       350 mm

Overall length for transportation      5.500 mm

WORK RANGE

MAX digging radius     5.530 mm

MAX digging radius at ground lever 5.420 mm

MAX digging depth      3.405 mm

MAX vertical wall digging depth 2.900mm

MAX digging height     5.030 mm

MAX dumping height   3.410 mm

MAX dozer cutting depth    380 mm

MAX dozer lifting height     255 mm

 HYDRAULIC SYSTEM(JAPAN KYB)

An excavator is an consisting of an articulated arm (boom, stick), bucket and mounted on a (a rotating platform, like a ) atop an undercarriage with or . Their design is a natural progression from shovel

Usage

Excavators are used in many ways:

Digging of , holes, Material handling Brush cutting with hydraulic attachments

General grading/landscaping Heavy lift, e.g. lifting and placing of pipes , especially, but not only

Driving , in conjunction with a Configurations

Excavators come in a wide variety of sizes. The smaller ones are called a mini-excavator or . One manufacturer's largest model weighs 84,980 (187,360 ) and has a maximum bucket size of 4.5 m3 (5.9 yd3). The same manufacturer's smallest mini-excavator weighs 1470 kg (3240 lb), has a maximum bucket size of 0.036 m3 (0.048 yd3) and the width of its tracks can be adjusted to 89 cm (35 inches). Another company makes a mini excavator that will fit through a doorway with tracks that can be adjusted to only 70 cm (28 inches) wide. 

Excavator attachments

In recent years, hydraulic excavator capabilities have expanded far beyond excavation tasks with . With the advent of hydraulic powered attachments such as a , a or an , the excavator is frequently used in many applications other than excavation. Many excavators feature quick-attach mounting systems for simplified attachment mounting, increasing the machine's utilization on the jobsite. Excavators are usually employed together with and . Most wheeled versions, and smaller, have a small backfill (or dozer-) blade. This is a horizontal bulldozer-like blade attached to the undercarriage and is used for pushing removed material back into a hole. Prior to the 1990s, all excavators had a hang over, or "conventional" counterweight that hung off the rear of the machine to provide more digging force and lifting capacity. This became a nuisance in tight turn areas - the machine could not swing the second half of its cycle due to restricted turn radius. In the early 1990s The Komatsu Engineering Company launched a new concept excavator line that did away with the "conventional" counterweight design, and so started building the world's first tight tail swing excavators (PC128.PC138,PC228,PC308). These machines are now widely used though out the world.

CT45 Mini Excavators (Hydraulic Crawler Excavator)

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.