Honeycomb ceramic is used as a carrier in a three way catalytic converter for automobile industry with its special large surface area. The product can load enough noble metal and other catalytic reactive components, making the Carbon Monoxide (CO), Hydrocarbons (HC), Nitrogen Oxides (NOX) in car exhaust emitted after purifying. Meanwhile, the wall-flowing type of filter with porosity and thin wall is able to filter particulates in the diesel exhaust gas (about 500°C).
1.Technical data of petrol vehicle honeycomb ceramic substrate:
Parameters | Unit | standard | typical data | |
Cordierite crystal phase | wt% | ≥90 | 94 | |
Coefficient of Thermal Expansion20-800°C | cm/cm/°C | ≤1.8×10-6 | ≤1.5×10-6 | |
Thermal Stability20-650°C | times | ≥1 | 3 | |
Soften Temperature | °C | ≥1420 | 1440 | |
Compression Strength | Lengthways | MPa | 16 | 16.9 |
Horizontal | MPa | 5 | 6.2 | |
Specific Weight | Kg/L | 0.45-0.55 | 0.45-0.5 | |
Porosity | % | 40-45 | 41 | |
Water-absorbing rate | % | 23-25 | 23.8 |
2.Specification of catalyst carrier (straight hole)used in petrol engine car:
Rotundity shape | Ellipse shape | ||
Specificationmm | Number of channels (holes /square inch) | Specification (mm) | Number of channels (holes /square inch) |
Φ83×85 | 400 | T146.8×77×86.4 | 400 |
Φ144×152.4 | 400 | T120.6×80×152.4 | 400 |
Φ100×100 | 400 | T169.7×80.7×76.2 | 400 |
Φ130×130 | 400 | T144.8×81.3×152.4 | 400 |
Φ118×150 | 400 | T144.8×81×76.2 | 400 |
Φ103×100 | 400 | T169.7×80.7×101.6 | 400 |
Φ150×75 | 400 | T144.8×81.3×100 | 300 |
Φ83×125 | 400 | T127×63.5×107 | 300 |
Φ150×150 | 300 | T144.8×81.3×70 | 300 |
Φ120×100 | 300 | T144.8×81.3×150 | 300 |
Φ101.6×100 | 300 | Race track shape | |
Φ94×100 | 300 | P120.65× 80.01×76.2 | 400 |
Φ85×70 | 300 | P120.65×80.01× 76.2 | 200 |
Φ93×76 | 200 | P144×68×150 | 400 |
Φ118×76 | 200 | P125×80×100 | 400 |
Note:we can be customized as per client's requirements.
ceramic substrate