√ Automatically and continuously adjusting feeding rate through frequency converter so as to make the grinder run at full load. Power consumption is lowered and the converter has wide frequency range.
√ Iron removal equipment is set near the outlet, ensuring clean material flow into grinder.
√ Both end parts of the feeder are sealed with cover prolong the service lives of the bearings with pedestals;
√ With offset inlet, the possibility that materials stuck in impeller blades and the casing is reduced.
√ A baffle is equipped over the feeding roller. Through adjusting the gap between baffle and excircle of feeding roller, different materials can be fed or feeding rate of feeder can be changed.
The machine is a fine grinder feeder,widely used for feeding granular and mash materials in grain, edible oil,feed as well as food plants.Performance parameters:
Type | Capacity(t/h) | Power(kW) |
TWLY25*60 | 20-52 | 1.5 |
Note??Above datas are based on the following conditions??material corn, bulk density of 720kg/m3, motor frequency 20-80(hz)
...
[MUYANG-TWLY]Feed Hammer Mills & Impeller Feeder(20-52 t/h)