Performance Characteristics
n With PIN Photoelectric Converter and High Response.
n Optimization circuit design, SMT process production, optimization signal path, fluency photoelectric signal transmission.
n With specialized RF attenuate IC, Good linear of RF and equality and high accuracy.
n GaAs amplify, power double output, high gain and low distortion.
n Microprocessor control working status, LED shows all parameters, convenience operation and high stability.
n Optimization AGC performance, when the input power range is 92dBm, the output lever, CTB and CSO keep constantly.
n Backup data communications interface, it is convenient to connect with network management responder, connecting with network management system.
Technical Parameter
Item | Unit | Technical Parameter | |||
Optical Parameter | |||||
Receive Optical Power | dBm | -9 ~ +2 | |||
Return Loss | dB | >45 | |||
Optical Wavelength | nm | 1100 ~ 1600 | |||
Connector Type |
| FC/APCSC/APC | |||
Fiber Type |
| Single Mode | |||
Circuit Performance | |||||
C/N | dB | ≥ 51-2dBm Input | |||
C/CTB | dB | ≥ 65 | Output Level 108 dBμV Balanced 6dB | ||
C/CSO | dB | ≥ 60 | |||
RF Performance | |||||
Frequency Range | MHz | 45 ~862 | |||
Flatness in Band | dB | ±0.75 | |||
Rated Output Level | dBμV | ≥ 108 | |||
Max Output Level | dBμV | ≥ 112 | |||
Output Return Loss | dB | ≥14 | |||
Output Impedance | Ω | 75 | |||
Electronic Control EQ Range | dB | 010 | |||
Electronic Control ATT Range | dBμV | 020 | |||
Return Transmit Performance Parameter | |||||
Optical Parameter | |||||
Optical Transmit Wavelength | nm | 1310±10 | |||
Output Optical Power | dBm | 1 ~ 5 | |||
Connector Type |
| FC/APCSC/APC | |||
RF Parameter | |||||
Frequency Range | MHz | 5 ~ 65 or according to the requirement of user | |||
Flatness in Band | dB | ±1 | |||
Input Level | dBμV | 85 ~ 90 | |||
Output Impedance | Ω | 75 | |||
General Parameter | |||||
Supply Voltage | V | AAC150~265VBAC35~90V | |||
Operating Temperature |
| -40~60 | |||
Storage Temperature |
| -40~65 | |||
Relative Humidity | % | Max 95% No Condensation | |||
Consumption | VA | ≤ 30 | |||
Dimension | mm | 240L 240W 150H | |||
Note: The parameter of forward RF is tested under the condition of using GaAs 25 dB double power module in the last stage, if you use other module, the parameter will be slightly different.
CERTIFICATE
SR814B CATV SNMP OPTICAL NODE
Verified Information This information is Verified by Bureau Veritas and validity period is 2012/06/29 --- 2013/06/29 All the information below may covers both Gold Supplier and its related companies , Their Relationship will be affirmed according to china laws and regulations , also it will be clearly display in the full report >> Production Capacity:Optical Transmitter, Optical Receiver, Optical Amplifier, Splitter and Taps, RF Amplifier | USD 3,000,000 per year | USD 2,243,175 |
South America | USD 1,205,960 | 53.76 |
Eastern Europe | USD 55,345 | 2.47 |
Southeast Asia | USD 783,865 | 34.94 |
North America | USD 194,844 | 8.69 |
Western Europe | USD 2,105 | 0.09 |
Domestic Market | USD 1,056 | 0.05 |
Motor-driven screw driver | 12V, 1.5Ah | 2 | 1.0 | Acceptable |
Soldering machine | L40800B | 30 | 1.0 | Acceptable |
RF modulator rack system | SS-106 | 1 | 1.0 | Acceptable |
LCR digital electric bridge equipment | YD2811C | 1 | 1.0 | Acceptable |
Multimeter | LD9807B | 30 | 1.0 | Acceptable |
Net analysis equipment | 8711 | 4 | 1.0 | Acceptable |
Oscilloscope (OSC) | MOS-620CH | 1 | 1.0 | Acceptable |