Features
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely,Adopts WDM technology, transmitting and receiving data on one single fibeComplies with 802.3u 10/100Base-TX, 100Base-FX standardsExtends fiber distance up to 20kmAdopts WDM technology, transmitting and receiving data on one single fiberAuto negotiation of 10/100Mbps and auto MID/MID-X for TX portSupports flow control for full and half duplex operationSupport link fault pass through function (LEP) LFPPlug & Play InstallationOptions | Details | |
Model | FMC-112CS | |
Standard Ports | 1 10/100Base-TX Port & 1 10/100Base-FX Port | |
LED Indicators | PWR, FX-SD, FX-Link/Act, TX- SPD, TX-Link/Act, TX-FDX/COL | |
Standards and Protocols | IEEE802.3, IEEE802.3u, IEEE802.3x | |
Functions | Half/Full-Duplex transfer mode for FX port | |
Full Duplex Flow Control | ||
Half Duplex Flow Control | ||
Extends fiber distance up to 20km | ||
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely | ||
Network Media | 10BASE-T | UTP category 3,4,5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
100BASE-T | UTP category 5,5e cable (maximum 100m) EIA/TIA-568 100Ω STP(maximum 100m) | |
100BASE-FX | Single-mode Fiber | |
Safety & Emission | FCC Part15, CE ROHS | |
Operating Temperature | 0°C~45°C | |
Storage Temperature | -45°C~80°C | |
Operating Humidity | 10%~90% non-condensing | |
Storage-Humidity | 5%~90% non-condensing |
10/100M RJ45 to 100M single-mode SC fiber Converter