Welcome to ECVERY
Built in power module v.35 to fiber optic v.35 fiber optical modem
Built in power module v.35 to fiber optic v.35 fiber optical modem
Supplier Info
[China Supplier]
Contact Person : Ms. xiao yanqun
Tel : 86-020-82319302,13760887412
Fax : 86-020-82329792
Product Detail
Extended transmission range up to 100Km Single mode or Multi-mode is optional Three year warranty ISO certification

GQ7003  V.35 Fiber Optical Modem

Introduction 

        GQ7003 V.35 Fiber Optic Modem provides the user the capability to establish communication between two v.35 interfaces or between an E1/FE1 interface an a N×64k(N=1~32)V.35 interface over an optical fiber link.

       The primary application for the Ethernet  fiber optic modem is to establish point-to-point fiber link at ranges longer than any copper modem can achieve.

   GQ7003 V.35  fiber optic modem supports different fiber optic interfaces and can operate with several grades of fiber optic cable, the equipment interoperate over GQ7001 E1 fiber optic modem

The Image of GQ7003
 
Features
Provide fiber link for LAN applicationsUp to 100Km transmission on Single mode or 2Km on Multimode fiberSupport 1  channel V.35  interfaceSelectable data rate from 64 to 2048 kbpsLocal and remote loopback testSupplied with perfect function of status indication to facilitate maintenance and managemenHot Swappable3years warranty
 Typical Application Digram of GQ7003

                                     Typcial Application 1 Digram of GQ7003 Fiber Optic Modem

                                     

                                     Typcial Application 2 Digram of GQ7003 Fiber Optic Modem

Specifications

Optical Interface:

Port number:1

Bit rate:150Mb/s

Wavelength: 850nm/1310/1550nm

Distance:0~120Km

Physical Connector :FC/SC

Fiber mode: dual fiber single-mode, single fiber single-mode

V.35 Interface :

Channels:1

Interface mode : DCE

Interface bit rate : n×64k(n=1~32)

Connector: DB-25 (Female)

Environmental

Operating Temperature: 0 to 70°C (32 to 158F) 5 to 95% RH

Storage Temperature:   -40 to 85°C (40 to 185F) 95% RH

Power Requirements

Power Input: AC /DC optional

   DC power: DC-48V (-36V~-72V )

AC power: AC220V (185~265V)

   Power Consumption: <5Walt

Mechanical Specifications

Dimensions: 23cm(w)×14.3cm (h)×4.9cm (d)

Built in power module v.35 to fiber optic v.35 fiber optical modem

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.