Ads by Google
16E1+100M PDH is developed based on the VLSI chips. Relying on the advanced multiplexing technique. 16E1+100M PDH realizes 16 E1 and 100Mb/s fast Ethernet transmission with the function of Auto-Laser-Shutdown (ALS, optional).It is suitable for small-capacity switch networking, user loop line network, mobile communications (base station), private network, DDN, etc.
Main Feature
Maximum 2 Ethernet with 10/100M adaptive and full/half duplex .16 E1 offered. All digital clock recovery and smooth phase-locked technologySingle or dual power option. Dual power with hot standby. AC220V or DC-48V optional.Perfect local/remote alarm monitor.Local/remote E1 spur track loopback.Technical Parameters
Optical interface | Wavelength: 1310nm(standard model) or 1550nm |
Irradiance power ≥-12dBm | |
Incept Sensitivity: ≤-37dBm(BER≤10-11) | |
Default interface type: FC or SC | |
Default optical module: dual fiber, single mode, 40km | |
E1 interface | 16E1 interface |
Code: HDB3 | |
BNC or RJ45 available by adaptor in the accessory | |
According to ITU-T G.703, G.7042, G.823 | |
Ethernet interface | 2 Ethernet ports available |
Auto adapt 10/100M | |
Interface mode: full/half duplex | |
Auto adapt MDI/MDIX | |
Connector: RJ-45 | |
Environment | Power : 220V±20% , -36 ~ -72V |
Power consumption: less than 15W | |
Operating temperature: 0°C~45°C | |
Relative humidity≤95%(25°C) | |
Power consumption: <15W |
16E1 PDH Optical Multiplexer with 1*RS232 and 1*10/100M Ethernet