ODF(Optic Distribution Frame)
Description
This distribution frame consists of a rack equipped with the necessary fitting for management of the jumpers and for ensuring their bend radii. Rings and securing devices located on the left-hand side of the rack are used to route the jumpers vertically. The rack also has a removable glazed door with a lock as well as removable rear panels.It can accommodate 36- fiber cable heads (2U) and 6/12/24 racks. The fittings are designed for ergonomic operation (accessibility, routing of jumpers, floor clearance etc).The rack is supplied with the screws and bolts needed to secure the equipment. Blanking panels are used to close off unused access points.
Features
a).Easy accessb).Open-endedc).Narrow rack, small dimension, adequate room for operation. d).Largest capability: 60 to 72 connectors.e).Removable rear panel making racks back to back installation convenient.f).Providing optical fiber cable through going, storage.h).Reliable devices for cable securing, stripping and grounding.i).Allowing for Access from top or bottom.
Main Technical Data
Operating temperature: -10°C~+55°C Relative humidity≤100% (0°C~35°C) ≤75% (>40°C)Atmospheric pressure:70~110Kpa Insertion Loss (including adapters and fiber jumpers): ≤0.5 dBReturn loss:PC type≥45dB APC type≥60dB UPC type≥50dB Connector plugging-inserting life≥1000 times Insulation resistance between the rack and the grounding device of the frame≥1000MΩ/500V (DC) Di-electronic strength between the rack and the grounding device of the frame 3000V (DC)/min, no breakdown, no flying-arc.
ApplicationBuilding utilityLAN applications.
Ordering direction
|
Optic Distribution Frame