good combination of resin easy operation good wet strength retention good laminate transparency

Product Introduction:

 Fiberglass Chopped Strand Mat is an non-woven E- or C-glass fiberglass fabric manufactured by spreading continuous filament rovings of 50mm in length randomly and uniformly in combination with polyester binder in power form (or other binder in emulsion form).

 

 Characteristic and Application:

Chopped Strand Mat is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost.  It is suitable for the application by hand lay-up FRP moudings, such as, various sheets and penels, boat hulls, boat tubs, cooling towers, corrosion resistand, vehicles, etc.

Glass type: E-glass  and C-glass Chopped Strand Mat. Bond type: Powder or Emulsion.Density: 80g/m2-900g/m2. Normal types : 180g/m2. 225g/m2. 300g/m2 450g/m2. 600m2.Bond Content: 100g/m2 (10%-15%). 300g/m2.450g/m2.600g/m2 (4%-6%)Roll Width: 200mm-2600mm. Normal types :750mm.1040mm.1250mm.1270mm.1450mm.Roll weight/: 28kgs-55kgs. Normal types :28kgs.30kgs.35kgs.

Deposited:

Chopped Strand Mat should be stored in dry, cool, clean and rainproof area. Recommended temperature range of storage is between 15-30 and relative humidity between 40%-70%.

fiberglass chopped strand mat