Welcome to ECVERY
Fiberglass Chopped Strand Mat
Fiberglass Chopped Strand Mat
Supplier Info
[China Supplier]
Contact Person : Mr. Yang Abel
Tel : 86-512-52521366
Fax : 86-512-52525973
Product Detail
Fiberglass Chopped Strand Mat Emusion or Powder Density: 80-900g/m2 Width: 200-2600mm.

 Fiberglass Chopped strand mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are widely used in hand lay-up process and can also be used in filament winding, compressing molding and continuous laminating processes. The typical end-use applications including various panels, tank, boats, FRP roofing sheet, Auto roof, bathroom equipment and cooling tower, etc.

  

General Data.

Glass type: E-glass or C-glass

Bonder type: powder binder or emulsion binder

Density: 80-900g/m2. Usually 225gsm / 300gsm / 450gsm / 600gsm

Roll width: 200-2600mm usually 750mm / 1040mm / 1250mm / 1270mm

Roll weight: 28kgs-50kgs

 Packing:

Product is made in form of a roll wrapped on a paper tube, then packed in a plastic bag and then placed within a cardboard carton. Rolls can also be loaded in container directly or with pallets.

  

Storage:

Chopped strand mat should be stored in dry, cool, clean and rainproof area. Recommend temperature is 15-30, and relative humidity 40%-70%.

Fiberglass Chopped Strand Mat

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.