Welcome to ECVERY
Core Combination Fabric mat
Core Combination Fabric mat
Supplier Info
[China Supplier]
Contact Person : Mr. lai houp
Tel : 86-020-39966205
Fax : 86-020-84558616
Product Detail
Core Combination Fabric mat 1.core mat 2.combination mat 3.For RTM,vacuum,press,injection,SRIM

Core Combination Fabric mat

Core combination fabrics consists of a synthetic non-woven core, sandwiched between chopped glass fibers (with no binder), or woven fiber and stitch together.

The Core Fabric can be used for RTM, Vacuum, Press, Injection, SRIM process.

General Data

Outer layer Available

WoviFab: 200 ~ 1200g/ m2

MultiFab: 300 ~ 1600g/ m2

Chopped glass: 100 ~ 600 g/ m2

Core Material

Non Woven PP Core: 180 ~ 250g/ m2

Non Woven PET Core: 120 ~ 250g/ m2

Width: Max. 2700mm

Roll length: To be specified


CoreCombi are available in combinations to suit exact requirements. Stitch bonded-no chemical binders Conforms to most mould shapes Easy resin flow High wetting capacity


Product is manufactured in form of a roll wound on a paper tube and then packed in a plastic film and placed within a cardboard carton. Rolls can be loaded into a container directly or on pallets.


It is recommended that the fiber glass are stored in a cool and dry environment. Recommended temperature range of storage is between 10 ~ 30 °C and relative humidity between 50 ~ 75%. The fiber glass should remain in the packaging until just prior to use.

Core Combination Fabric mat

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.