Welcome to ECVERY
Chopping Roving glassfiber
Chopping Roving glassfiber
Supplier Info
[China Supplier]
Contact Person : Mr. lai houp
Tel : 86-020-39966205
Fax : 86-020-84558616
Product Detail
Chopping Roving glassfiber 1.CSM material 2.e-glass continuous fiber

Chopping Roving glassfiber

Chopping roving is a multi ends of E glass continuous fiber designed for power and emulsion chopped strand mat, and also it can be used for making mat by using knitting process and to make flat panel for automotive industries. It offers good dispersion and chop ability and is compatible with UP resin. It is designed to produce finished products as GRP boat hulls, sanitary apparatus.

Typical Range

Product Code

Tex Count ( Tex )

Moisture Content (%)

Loss On ignitions (%)





0.37 ~ 0.57

CSM, Knits



≤ 0.15

0.65 ~ 0.90

Knits, Flat Panel



≤ 0.15

0.60 ~ 1.00


Remark :

The above parameters are only in common condition. In case of order, the parameters are subject to the customer's confirmation.


Product is manufactured in form of a roll shrink wrapped with PE film, 48rolls or 64rolls per big carton palletized. Or each roll is put into individual carton then palletized.


It is recommended that the fiber glasses are stored in a cool and dry environment. Recommended temperature range of storage is between 10 ~ 30 °C and relative humidity between 50 ~ 75%. The fiber glass should remain in the packaging until just prior to use.

Chopping Roving glassfiber

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.