synthetic pocket filter
Designed for high performance in demanding operating conditions
are ideal for healthcare facilities, automotive paint booths, commercial buildings, and a variety of industrial applications.
Frame: galvanized steel or extruded aluminum
Filter media: progressively structured synthetic fiber
Gasket: no
EN 779 class: F5-F9
Average arrestance: 95-98%
Maximum air flow rate: 125% of nominal air flow rate
Max. operating temperature: 80OC
Max. relative humidity: 100% RH
Special sizes: on request
DIN3438-F1 and UL900-class 1
high dusting hold,high efficiency ,low pressure drop, efficiently delete mirco duct((≥3.0~5.0μm)
ultrasonically-welded pocket configuration that guarantees complete pocket inflation and eliminates crowding or leakage.
meltblown synthetic media protected by a scrim on the air leaving side. The media is layered to provide both a high efficiency final filter to capture fine particulate and an integral lofted prefilter layer for larger particulate. Meltblown synthetic media is stronger than fiberglass, non-shedding, and is water resistant. ribbons of fabric sealed inside the pockets to create aerodynamic channels for media utilization and longer service life.
model |
Outside Dimensions |
Rated air flow |
Initial resistance |
Efficiency (class) |
filter color |
pockets |
XN-ZXD-13 | 495×295×600mm 20″×12″×24″ | 1300m3/h | 50Pa F5 55Pa F6
60Pa F7 65Pa F8
| 40-50% F5 60-70% F6
75-85% F7
85-95% F8 colorimetric | F5 White F6 Green F7 pink F8 light yellow | 5 |
XN-ZXD-22 | 495×495×600mm 20″×20″×24″ | 2200m3/h | 5 | |||
XN-ZXD-16 | 595×295×600mm 24″×12″×24″ | 1600m3/h | 6 | |||
XN-ZXD-27 | 595×495×600mm 24″×20″×24″ | 2700m3/h | 6 | |||
XN-ZXD-32 | 595×595×600mm 24″×24″×24″ | 3200m3/h | 8 |
accorfing to user requirements to customize different size and types of filters!
synthetic pocket filter