Liquid bag filter is made of polyester fibers paper-PE, polypropylene fiber filter paper-PP,nylon monofilament mesh-MO.

 

                                 PP Liquid Filter Bag

 

Liquid bag filter is made of polyester fibers paper-PE, polypropylene fiber filter paper-PP,nylon monofilament mesh-MO. PE, PP is an underlying three-dimensional filter material, 100% pure fiber produced by acupuncture, the formation of three-dimensional, high fluffy three-dimensional depth, twists and turns of the filter layer. Characterized by loose fibrous tissue, thus increasing the load capacity of impurities; The product is a double-closure model, an effective way to remove solids and soft particles, that is, the larger particles of impurities are retained in the fiber surface, while fine particles were capture in the deep filter, make sure that the process will not increase due to pressure damage,High filtration efficiency; In addition, the surface of products from high-temperature surface treatment, namely, the application of instantaneous sintering technology / pressure light processing, and can effectively prevent filtration by liquid when the fiber loss of high-speed impact, not only to ensure that no fibers from the pollution caused by filtrate and to avoid dealing with the traditional roll-over-plug holes caused by the filter bag to shorten life expectancy, at the same time no effect to the velocity of small pressure differential; 1-200 micron accuracy.

MO is not in accordance with the deformation of spinning nylon woven specifications designated network, after the heat setting by a single wire; characterized by high intensity, will not be deformed with the change of pressure, Constitutes a monofilament woven smooth surface, easy to clean, can be used repeatedly and at the same time suitable for high levels of some impurities in the liquid filtration, such as lowering the filter from the cost;

 

Filter Precision: 20PPI-550PPI((25μm-840μm).

Collar extension fixed filter bag Material:stainless steel coil, galvanized steel, polyester / polypropylene plastic ring

Standard filter bag size:No.1 bag-Φ180×430mm (Φ7×17inch) No.2bag-Φ180×820mm (Φ7×32inch) No.3bag-Φ106×230mm (Φ4×9inch) No.4bag-Φ106×380mm (Φ4×15inch) No.5bag-Φ152×510mm (Φ6×20inch)Special size availadle upon request.

 

 

Application Fields

 

Metallurgy, petrifaction, spinning, electron & pharmacy, power generation & nuclear power, machining equipment, train internal-combustion engine & generator, auto engine 

 

 WATER FILTERS:

used for chemical,spinning PP Liquid filter bag