Key words: Fire alarm Control Panel,conventional fire alarm control panel, fire alarm panel, fire alarm, FACP, fire alarm system, fire-fighting, fire panel, fire alarm controller, fire alarm control unit
Product OverviewThe ODH08-16 Conventional Fire Alarm Control Panel is a 24volt, 8 or 16 zone, Class B, Conventional Fire Alarm Control Panel. It is designed exclusively to meet the latest market requirements and microprocessor technology, with stand-by batteries (two sealed acid storage batteries) and reserved space for installation. It has functions of operation indication, fault indication, alarm indication and cable checking for short circuit or broken circuit. The highly cost-effective ODH08-16 can be used in low-sized applications.
Characteristicsl Style B (Class B) Initiating Device Circuits (IDCs) accept two-wire smoke detectors and any normally-open contact devices
l One set of volt free changeover contacts operable on fire
l One set of volt free changeover contacts operable on fault
l Non-latching zones facility
l Class change input for remote control
l Zone and alarm disablement
l 28V 125mA fused supply permanently available
l 28V 300mA fused supply available for fire alarm bells or sounders
l Passive repeater available
SpecificationsAC Power: AC220V±10% 50Hz, 2.0 amps, minimum 14 AWG wire (2.0 mm²) with 600-volt insulation.
Battery: Sealed lead-acid batteries, Maximum battery charger capacity: 4AH battery
Total 24 V system power: 3.0 amps
Zone Capacity: can be connected with 30 fire detectors and infinite manual call points
Fire & Fault Contact Outputs: 1.0 amps DC24V or AC125V
Using environment: Temperature: 0°C~50°C Related Humidity: ≤95% (40±2°C)
Dimensions: 265×335×87mm (length × width × depth)
Orena Sales and ServiceShenzhen Orena Photonic Technology Co., Ltd
Orena Bldg, 691# Longjing Road, Nanshan District, Shenzhen, 518055, P.R.China
Tel: 86.755.8623.3886 86.755.2678.7499 Fax: 86.755.2678.1400
8~16 Zone Conventional Fire Alarm Control Panel ODH16