J-SJP-M manual fire alarm button has a simple structure, novel design and easy installation. Four specifications for choice.

I.         Brief introduction and application

J-SJP-M manual fire alarm button has a simple structure, novel design and easy installation. It is applicable to the fire alarm equipment of factory, warehouse, hotel, large and  medium sized buildings.

In case of fire, break the glass or push the button(resetalbe)  to give out the alarm signal and start the fire alarm and other coupled firefighting equipment. After operation, no parts are required to be changed. Reset by key.

II.      Main technical parameters

Working voltage: DC24V/AC220V

Contact resistant: not more than 0.1ohm

Max. working current: 5A

Working current of indicator: not more than 5mA (DC24V)

III.   Applicable working environment

1)        Temperature: -10°C~+50°C

2)        Relative temperature: not more than 95% (at 25°C)

IV Specifications.

Manual Call Point Button (break glass)	J-SJP-M-I
Manual Call Point Button( resetable)	J-SJP-M-II
Manual Call Point Button	J-SJP-M-III
Manual Call Point Button ( wheather proof)	J-SJP-M-IV

fire alarm call point