Lining fire hose
1 Single Jacket Fire Hose
It's NR/EPDM/SBR/PVC etc lined and single jacket.
It is of light weight and compact, approximately half the weight of standard rubber lined single jacket hose.It is highly resistant to ozone, abrasion and lightweight, outstanding low temperature performance, excellent mechanical properties, high tear strength and elasticity-similar to rubber, high transparency, as well as good oil and grease resistance.The liner process produces an amazingly thin but smooth inner waterway, yielding an extremely low friction loss for maximum flow.
I .D. | Working Pressure | Burst Pressure | |
(Inch/mm) | (Bar/Psi) | (Bar/Psi) | |
1" | 25 | 15/225,17/250, 20/300 | 45/675,51/750 |
1-1/4" | 32 | 15/225,17/250, 20/300 | 45/675,51/750 |
1-1/2" | 38 | 15/225,17/250, 20/300 | 45/675,51/750 |
1-3/4" | 45 | 15/225,17/250, 20/300 | 45/675,51/750 |
2" | 52 | 15/225,17/250, 20/300 | 45/675,51/750 |
2-1/2" | 64 | 15/225,17/250, 20/300 | 45/675,51/750 |
2-3/4" | 70 | 15/225,17/250, 20/300 | 45/675,51/750 |
3" | 75 | 15/225,17/250, 20/300 | 45/675,51/750 |
4" | 102 | 10/150,13/200 | 30/450,39/600 |
5" | 127 | 8/125,10/150 | 24/375,30/450 |
6" | 152 | 8/125,10/150 | 24/375,30/450 |
Other working pressure fire hose is available too.
STANDARDThe Single Jacket Fire Hose manufactured meet and exceed all performance requirements of EN14540,BS6391.
CONSTRUCTIONSingle jacket, 100% high tensile strength virgin polyester filament yarns, both warp and filler;
Smooth TPU/EPDM/NR/SBR/PVC liner ensures the minimum friction for maximum flow.
APPLICATION• Industrial and municipal fire brigades• Military• Marine fire fighting• Interior rack and reel hose• Commercial and civil engineering
COLORThe standard color for Single Jacket Fire Hose is white. Other colors are available.
Abrasion resistant coatings are red, yellow, orange, blue, green and tan. Color will be uniform throughout the length of each hose. Cost for color coating is additional.
STANDARD LENGTH20m, 25m, 30m, 40m.Other length on your request.
2,Double Jacket Fire Hose
It’s NR/EPDM/SBR/PVC etc lined and double jacket. Jacket constructions include a second closely woven jacket for extra durability, safety factor and higher service pressure. It is more aging and ozone resistant.The jacket is even and firm woven and free from visible defects, thread knots, lumps and irregularities of twist.The warp is consist of high strength polyester staple yarns. The filler is high strength, low elongation filament polyester. Jacket is plain or twill woven.
I .D. | Working Pressure | Burst Pressure | |
(Inch/mm) | (Bar/Psi) | (Bar/Psi) | |
1-1/2" | 38 | 16/250, 21/300,28/400 | 48/750,63/900,84/1200 |
2" | 52 | 16/250, 21/300,28/400 | 48/750,63/900,84/1200 |
2-1/2" | 65 | 16/250, 21/300,28/400 | 48/750,63/900,84/1200 |
3" | 75 | 16/250, 21/300 | 48/750,63/900 |
Other working pressure fire hose is available too.
CONSTRUCTIONDouble jacket, the warp is high strength polyester staple yarns.
The filler is high strength, low elongation filament polyester yarns.
APPLICATION• Industrial and municipal building fire fighting• Marine fire fighting• Industrial plant , agriculture and construction site waterdischarge service or wash down
COLORThe standard color for Single Jacket Fire Hose is white. Other colors are available.
Abrasion resistant coatings are red, yellow, orange, blue, green and tan. Color will be uniform throughout the length of each hose. Cost for color coating is additional.
Lining fire hose