1.1 Model No.: ISUZU FVR23HRX17RS85 Diesel Freighter 1.2 Engine 1.2.1 Model No.: ISUZU 6SDI STD 1.2.2 Power: 240hp/2500rpm

1. CHASSIS

1.1 Model No.: ISUZU FVR23HRX17RS85 Diesel Freighter

1.2 Engine

1.2.1 Model No.: ISUZU 6SDI STD

1.2.2 Power: 240hp/2500rpm

1.2.3 Torque: 725N.m

1.3 Drive: 4×2

1.4 Wheelbase:   mm

1.5 Top Speed: ≥110km/h

1.7 Dimension: (L×W×H)  

1.8Steering system: RHD  (Right Hand Drive)

2. CAB

2.1 Structure: Fully steel welding frame , four-door crew cab.

2.2 Seating: (2) front, (4) rear, (4pcs.) BA brackets and aero-seats to be furnished at the rear.

Apparatus Inside Cab

PTO switch, switch for 100W siren, bar light and PA power source connector to be provided. Backing monitor, warning lights and siren controller, buzzer for lockers door and cab door, Electrical door window, central locking , environmental friendly air conditioning system and heating device, radio to be furnished. Position for the installation of radio communication system.

Special notes: moulded upholstery of the cab

3. PNEUMATIC TELESCOPIC LIGHTING MAST

3.1 HONDA generator

3.1.1 Rated Power: 5 kW

3.1.2 Rated Voltage: 220V  

3.1.3 Pneumatic telescopic lighting  mast (FIRECO, Italy cs3605)

3.1.3.1 Max. work   height: 8m

3.1.3.2 Turning angle

3.1.3.2.1 Elevation: 30 °

3.1.3.2.2 Depression: 90 °

3.1.3.3 Rotation: 350°

3.1.4 Tile & Turn

3.1.4.1 One-button automatic reset, 4V TT31612 Tile & Turn

3.1.4.1.1Master lamp (Importation) 4×1000W

3.1.4.1.2 Portable lamp (Importation) 2×500W

3.1.4.1.3 Cable reel: (2 pcs.)×50m for civil; (2 pcs.)×50m for Fire

3.1.4.1.4 Explosion-free cable reel with extinguish color marker

4. WINCH (Importation fro USA)

4.1 Model No.: WARN M12000i (24VDC)

4.2 Cable length: 38m (30m backup)

4.3 Max. Pulling  capacity: 10800 kgf (with pulley block combination)

4.4 Max. pulling speed: 3.57 m/min

4.5 Installation: Bumper-mounted

5. CRANE

5.1Model No.: KN900

5.2Installation: Rear-mounted

5.3Max. Lifting capacity: 8.2 ton

5.4Max. work range: 7.56m

5.5Max. work height: 10m

5.6Jack distance: 4.5m

5.7Rotation: 410°

6. SMOKING BLOWER

6.1 Type: Mobile

6.2 Ventilation Volume: 9000 m3/h

6.3 Power: 1.5 kW

7.EQUIPMENT LOKER

6.1Material: Adjustable stainless frame, externally paneled with anodized aluminum sheet with aero-sticker of famous brand.

6.2Structure: Frame fully adjustable up and down.

6.3Door: Locker with roller shutters to be provided one at front and one at rear

Note: Roof working deck to be furnished with water proof enamel, cover for the lamp is frozen proof and is able to work at extreme weather condition.

6.4 Equipment Arrangement

6.4.1 Optimized design for the disposition of the rescue tools, ergonomically designation for the equipment holders according to the using frequency. Flip and flap foot step ease the operation of the individual tools.

8. FLIP & FLAP FOOTPLATE

Spring loaded flip-flap/foldable footsteps externally covered by the aluminum checked plates to be installed underneath the storage lockers for the quick access to remove the equipments from individual locker.

9. FINISH

Bright fire red

10. REGULATIONS

The fire rescue truck will comply with the following requirement:

10.1 GB7956 <Performance requirement and inspection method for fire truck>.

10.2 The flatness of the truck body in accordance with GA GA39.5-92

10.3 The strength of the adhesive sticker for the panel comply with works regulation.

10.4 All welding, brightness and flatness comply with works regulation.

11. DOCUMENTS

11.1 Chassis operation manual and other documentaries.

11.2 Tools kits list

11.3 Fire truck operation manual

11.4 Fire equipment list

11.5 Fire Truck certificate

11.6 Acceptance and delivery list

ISUZU Diesel Freighter