Welcome to ECVERY
Water-mixing temperature conrol center for floor heating system
Water-mixing temperature conrol center for floor heating system
Supplier Info
[China Supplier]
Contact Person : Mr. Shen Allen
Tel : 86-575-87659721
Fax : 86-575-87063607
Product Detail
temperature conrol center made from brass; max temperature: 95 deg C;

Water-mixing temperature conrol center

Heat source water temperature>=80 deg C, its main burning rate is higher. But the temperature of water cannot be high. If the temperature of water >=90 deg C, it will shorten 20% life of pipe, so mixing water cooling system must be installed. This system uses the electic tee ball valves, the output water temperature can be controlled in the range of 22-55 deg C. It works stable and the water temperature error of ±1 deg C. This system can control the temperature exactly, and it is used for excellent residential districts or  some places having high demand for temperature.

Detail:

1.Spacing:222mm between segregator and collector

2.Media:water and glycol(<=60%)

3.Using high-frequency welding, 35% period of solder, each solder joints tested by high pressure, prevent the leakage.

4.With the temperature gauge, controlling the temprature and pressure exactly.

5.Electric ball valve, actuator, thermostat. Realizing the automatic control of the temperature remotely, improving the quaity of your life, save the energy.

Water-mixing temperature conrol center for floor heating system

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.