1)Room Thermostats for Electric Underfloor Heating 2European elegant high-quality design 3)3 year Warranty on all thermostats

Room Thermostats for Electric Underfloor Heating

Introduction:

The RTC70.26 is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat.The thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.

Application:

For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings.

Features:

LED indicator is light when heating is onWith manual switch and knob for easy operationOn/off control output for heating device Setback function when connecting with a programmable timer

Temperature limitation function for protecting the floor

TECHNICAL DATA:

Voltage: AC230V (AC110V / AC24V available)Power consumption: 5WSetting range: 4°C~45°C Limitation scale: 25°C~50°C

Setback temperature: 5°C

Switching differential: ±0.5KAmbient temperature: -5°C~50°CProtective housing: IP20Housing material: self-extinguishing PCFloor sensor: rubber-thermoplastic NTC sensor,

Dimensions (H/W/D) 80/80/50 mmcable length is 3m

Electronic Room Thermostat RTC70 for Floor Heating System