Welcome to ECVERY
Electromagnetic Flow Meter
Electromagnetic Flow Meter
Supplier Info
[China Supplier]
Contact Person : Ms. Zhao Tina
Tel : 86-21-56027777-6953
Fax : 86-21-56026666-6953
Product Detail
Intelligent Electromagnetic Flow Meter Highly intelligentized Multi-electrode structure Serial communication bus

Electromagnetic Flow Meter can be widely used to measure the volumetric flow rate of the conductive fluid and slurry in the enclosed pipe such as water, sewage, kinds of acid & salt liquor, slurry, ore slurry, pulp and so on.

 

Technical Features:

Not affected by the change of the fluid condition such as density, viscosity, temperature, pressure and conductivity, and the signal output of inductive voltage is linear to average velocity, therefore it has a high accuracy of measurement.No obstacle parts in the meter tube so that no extra pressure loss; no movable parts, so meter has long service life.Short straight pipe required, only 5D for upstream and 3D for downstream due to inductive voltage signal which is the average value in the cross-section of the pipe.Only liner and electrode contact to the fluids, choose proper material of liner and electrode to prevent it from corrosion to ensure meter long operation life.MCU and SMT technology used in converter to make it has high performance, high accuracy, low power consumption, stable zero point, easy parameter setting, dot-matrix display for total and instantaneous flowrate, velocity and percentage of flowrate.Two-direction measurement for forward and reverse.  

 

Technical Specifications:

Size: DN 15 ~ DN 3200 Medium: Conductive liquid, slurry Medium Temperature: ≤160oC Conductivity: ≥ 5 μS/cm Accuracy: ±0.3%, ±0.5% Repeatability: ±0.1%, ±0.15%, ±0.25% Rated Pressure: 0.25, 0.6, 1.0, 1.6, 4.0MPa (or specified by customer) Display: Instantaneous flowrate, total flow, velocity, flowrate percentage with back light Signal Output: Analog 4 ~ 20mA, isolated, load resistor ≤750Ω;           Pulse frequency 0 ~ 1kHz, OCT, external power∠35V DC, 250mA/max Power Supply: Single-phase 85 ~ 265V AC, 45 ~ 63Hz, power∠20W; 24V DC, 10VA Converter Type: Compact, remote Protection Grade: IP65/ IP67/ IP68 Explosion Proof: Exd  II BT4/ Exib II CT4 Velocity: 0.3 ~ 12m/s( 0.1 ~ 15m/s as required) Liner: Chloroprene Gum (DN25 ~ DN3400)/ Polyurethane(DN25 ~ DN500)/ F4   ( DN25 ~ DN1200)/ F46(FEP)(DN25~DN200) /F40(DN25 ~ DN2800) /PO(DN50 ~ DN2800)/ PPS( DN50 ~ DN2800) Flowing Direction: Forward, Reverse Electrode Material: 316L, Pt, Ta, Ti, HB, HC Electrode Type: Standard, blade, removable Electrode Number: 2 ~ 6 pcs Flange Material: SS/ CS Alarm (N. O.): Empty, excitation, high/ low flowrate limit Ambient: Temperature: -25 ~ +60oC, Humidity: 5 ~ 90% Communication: RS-485/ Hart/ Profibus-DP

Electromagnetic Flow Meter

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.