Electric Turbine Flow Meter is suitable for diesel oil, gasoline and other light oil liquid transfer.
High precision, durable and compact turbine flowmeters.
Modular design allows for use with OutputModules, Sensors and Remote Transmitters.
Local Display Computer features: 2 Totals(1 Resettable, 1 Cumulative); Factory Calibrationin gallons and litres; 2 User Calibrationsand Flowrate.
Internal parts are simple to replace for easymaintenance.
Lightweight, compact design allows for easyinstallation.
Powered by Lithium batteries for approximately9,000 hours.
Fitting Type: | NPT or ISO (Female) | ||
Housing Material: | Aluminum | ||
Meter Sizes Available: | 3/4” 1” 1-1/2” | ||
Flow Range: | 3/4” | 2 - 20 GPM (7.6 - 75.7 LPM) | |
1” | 5 - 50 GPM (18.9 - 190 LPM) | ||
1-1/2” | 10 - 100 GPM (38.0 - 380 LPM) | ||
Accuracy (% of Reading): |
| Turbine Only | Turbine w/Computer |
3/4” | ± 1.5% | ± 1.0% | |
1” | ± 1.5% | ± 1.0% | |
1-1/2” | ± 1.0% | ± 0.75% | |
Repeatability: | ± 0.1% | ||
Pressure Rating: | 300 PSI / 21 BAR | ||
Operating Temperature Range: | -40°F to +250°F (-40°C to +121°C) | ||
Typical K-Factor: | 3/4” | 1,100 | |
1” | 565 | ||
1-1/2” | 215 | ||
Wetted Materials: | Housing: | Aluminum | |
Bearings: | Ceramic | ||
Shaft: | Tungsten Carbide | ||
Rotor: | PVDF | ||
Rings: | 316 Stainless Steel | ||
|
| ||
Frequency Range: | 3/4” | 37 - 370 Hz @ 2 - 20 GPM | |
1” | 47 - 470 Hz @ 5 - 50 GPM | ||
1-1/2” | 36 - 360 Hz @ 10 - 100 GPM | ||
Recommended Strainer Size: | 3/4” | 55 mesh | |
1” | 28 mesh | ||
1-1/2” | 55 mesh | ||
Maximum Flow: | 3/4” | 30 GPM (113.6 LPM) | |
1” | 75 GPM (284 LPM) | ||
1-1/2” | 150 GPM (568 LPM) |
Fuel Nozzle with Flow Meter
fuel nozzle with meter