Welcome to ECVERY
Flexible Printed Circuit
Flexible Printed Circuit
Supplier Info
[China Supplier]
Contact Person : Mr. Xiang Will
Tel : 86-021-61070563
Fax : 86-021-39650090
Product Detail
Reduce assembly costs Replacement for a circuit board and wires Reduce weight and space Dynamic Flexing Aesthetics

A Solution to a packaging problem

Flexible circuits allow unique designs which solve interconnection problems. The formability of a flexible circuit enables a package size reduction. A Flexible circuit makes installation and repair practical and cost effective.

Reduce assembly costs

Flex circuits can be tested prior to assembly of components. Elimination of connectors and solder joints reduce costs.  Replacement for a circuit board and wires

Flex circuits simplify system design. Flex circuits reduce the number of levels of interconnection required in an electronic package. Flexible circuits eliminate human error common in wire assemblies as routing is determined by artwork and repeatability is guaranteed.

Reduce weight and space

Considerable weight reduction is a benefit over wire harnesses. Thickness can be as thin as .004 inches (.10mm) in total.

Dynamic Flexing

The thinness of the material makes flex circuits the best candidate for flexible applications up to millions of flexures.

Thermal management/high temperature applications.

Flex circuits dissipate heat at a better rate than any other dielectric materials while providing the added benefits of vastly improved flexibility.


Flexible circuits improve the internal appearance of an electronic package, which can have an influence on the decision making process of prospective users of the product.

Category  Single-side

Applied with single side material to make pattern on one side then add the cover layer on the same side   Double-side

Applied with double sides material to make pattern on both sides then add the cover layer on each side   Single-side double access 

double access Applied with single side material to make pattern but make some window on base film and add the cover layer on pattern top. The final products will have single layer copper but two sides access possibility   Multi-layer

Binding a single side and a double sides FPC together or binding a double sides and a double sides FPC together.  Rigid-flex board

Binding flexible and rigid boards structure together in same units as one part    

Flexible Printed Circuit

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.