TN Series Sensor
Model:TN-X210A
* The mouth of the pipes are standard screw joint.* Use 6 bolts to fasten the sensor.* An outer filter screen is used to filtrate the fuel.* Combine functions of level indicator, alarm(optional), suction and return pipes connected to the engine fuel pump, fuel filter(optional),air vent pipe(optional).* 304/316 stainless steel.* standard bayonet fitting(TNB), optional bayonets available.* standard flange holes(TN). Optional flange holes available.* Customised tube dimension.* Fully customizable resistance output.* Standard level measurement resolution of 21mm.* IP67 classified EMC approved.* Operational temerature range -40 to +85.* Vibration tested; corrosion tested; temerature tested;
length can be from 100 to 1600mm even above.
This sensor is 210mm long.
minimum:20pcs
Art. | Length(mm) | Output Signal(ohm) | Assembly Way | Alarm | Fitting | Filter | Suction Dia.(mm) | Return Dia.(mm) |
J-S50802 | 210 | 10-180 | 6*5.5mm | low alarm | non-standard fitting | nylon filter | 11*0.6 | 9*0.6 |
TN Series Sensor