Welcome to ECVERY
RW11-10 Drop type cut-out fuse
RW11-10 Drop type cut-out fuse
Supplier Info
[China Supplier]
Contact Person : Mr. Zhao Austin
Tel : 86-577-62873876
Fax : 86-577-62885599
Product Detail
1.material:porcelain and copper 2.rated voltage:12-15kV 3.IEC standards composite insulators

Drop type cut-out fuse has the following features:1.The fuse is suitable for 10kV distributing line type distribution transformer high-voltage side to protect the line and transformer against short-circuit and over load and capable of fitting with the hooked rod of load break operation to make and break an idle transformer, an idle line and loading current. It features light weight, simple structure, strong anti-contamination, convenient installation and so on2. Range: ambient temperature: no higher than +40 degrees, no lower than -40 degrees, no more than 1,000m above sea level (please note at order if used in a plateau)3. Wind speed no more than 35m/s4. Earthquake strength not in excess of 8 degrees5. Unsuitable for the combustible and explosive products 6. The product property conforms with GB 15166.3-94 and IEC282-2


RW11-10 Drop type cut-out fuse

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.