Welcome to ECVERY
5/8" drip irrigation drip line/emitter tubing
5/8" drip irrigation drip line/emitter tubing
Supplier Info
[China Supplier]
Contact Person : Ms. Tian Alice
Tel : 86-574-88126239
Fax : 86-574-86642134
Product Detail
Emitter tubing with various spacing Diameter:6mm,12mm,16mm Wall thickness:0.6mm,0.7mm,0.8mm...1.2mm Flux:2L/H,3L/H,4L/H

1001-Emitter tubing for drip irrigation

Specification

Dimater6mm,12mm,16mm
Thickness0.6mm,0.7mm,0.8mm,0.9mm...1.2mm
Spacing10cm,20cm,30cm,40cm.....200cm
Working Pressure0.6-3bar
Flux2L/H,3L/H,4L/H
Packing500m/roll,600m/roll or according to request

Packing Information

500m/roll or according to customer's request.

Advantage

The most versatile product in our catalog and one of our best sellers. In-Line Emitter tubing is standard 5/8" polyethylene tubing with either 2L/H,3L/H,4L/Hemitters extruded into the tubing at the factory. Since the emitters are already installed, all you do is roll out the tubing and connect it to your main water source. The cost is just slightly higher than if you inserted the emitters yourself, but the installation time is greatly reduced. In-Line Emitter Tubing can be used on long or short rows, flat or hilly terrain, raised beds, in loops around trees, or in straight lines for hedges and windrows. We offer this in a variety of emitter spacings

Our Main products

Impact sprinkler,Impulse sprinkler,pop-up sprinkler,micro sprinkler,microjets,pressure compensate dripper,flux adjustable dripper,drip tape,drip line,screen filter,disc filter,air release valve,irrigation fittings etc.If you are interested in our products please kindly send us inquiry.We will reply you by as soon as possible

5/8" drip irrigation drip line/emitter tubing

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.