Anti drip misting nozzle consists of brass nozzle body with internal stainless steel core and stainless steel guide vane.

FD anti drip misting nozzle Desription:

It consists of brass nozzle body with internal stainless steel core and stainless steel guide vane (with a leak-proof device).The liquid flows at high velocity under the water pressure of 70kg to 120kg, forming centrifugal swirl and spraying very fine hollow droplet.It is equipped with TEFLON strainer and the fog droplet sizes are about 50um.Widely used in workshop moistening salt spray test,man-made fog and other moistening locations.The imported US punching machine punches orifice about 0.1 to 0.15mm in size.The nozzle saves 10times or above cost than that of moistening by air.

Performance Data
Brass Nozzle	Orifice Diameter	Operation Pressure	Flow Rate
FD1	0.15mm	20-70kg/cm	20-46cc/min
FD2	0.20mm		49-89cc/min
FD3	0.30mm		80-145cc/min
FD4	0.40mm		95-178cc/min
FD5	0.50mm		130-243cc/min

If you are interested in it,pls don't hesitate to contact me!

FD anti drip misting nozzle