Hydrogen generator 1). Integrated with hydrogen purifier. 2). Easy to install and take small space. 3). Automatic controll.

Hydrogen generator

Main Technical Data:

Capacity: 5Nm³/h ~ 50Nm³/h

Impurity Content: ≤2ppm

Ammonia Remains:≤3ppm

Dew Point:≤-65C°

Work Pressure: 0.05~0.2Mpa

Fields of Application:

1).Metal Heat Treatment: Supplying protective gas for annealing of stainless steel tape, accurate steel tapes, steel wire, alloys, copper tube,copper wire and copper tape, etc.

2).Metal Deoxygenation: Suppling protective gas for the deoxygenation of tungsten,molybdenum and metal powder.

3).Powdered Metal Metallurgy: Suppling protective gas for metallurgy of the iron-based or copper-based powder.

4).Float Glass Industry: Suppling protective gas for the tin tank.

5).Electronic Ceramics: Suppling protective gas for the sintering furnance.

Work Principle:

This unit uses the liquid ammonia as its feed material.After being gasified and heated, the ammonia is decomposed into mixed gas consisting of hydrogen(75%) and nitrogen(25%). As the adsorption of the ammonia and the moisture by the molecular differs under the different temperature, high purity hydrogen could be put out through the process of normal temperature adsorbing,heating and regenerating.

The switching over of the valves and heating time could be automatically controlled without special operator.

DP-003 Integrated ammonia decomposition hydrogen generator with purification system