PTFE ROD
1.Introducing
There are two kinds of PTFE rods to offer. One is manufactured by Paste extruding method in the diameter from 4 to 9mm and the other Is made by ram extruding method is the diameter from 10to 50mm; rods Over the diameter 50mm are manufactured by moulding. PTFE is the most chemical-resistant of all known plastics. It does not age. PTFE has a wide range of practicable temperature from 180%°C - +260°C and a wax-like surface to which anything hardly sticks. PTFE has the lowest coefficient of friction of all known solid materials. It has the best electrical properties of all plastics.
2.Normer size
SIZE 1 | UNIT | SIZE 2 | UNIT | SIZE 3 | UNIT | SIZE 4 | UNIT |
3 dia | mm | 25 dia | mm | 70 dia | mm | 200 dia | mm |
4 dia | mm | 30 dia | mm | 80 dia | mm | 300 dia | mm |
5 dia | mm | 40 dia | mm | 90 dia | mm | ||
6 dia | mm | 50 dia | mm | 100 dia | mm | ||
20 dia | mm | 60 dia | mm | 150 dia | mm |
3.Chemical analysis
Properties | Unit | Result |
Apparent Density | g/cm3 | 2.10~2.30 |
Tensile Strength (min) | MPa | 15.0 |
Crack Elongation (min) | % | 150 |
4.Packing
Usually we adopt cartons
To get further information, pls visit our website:
http://www.chinaptfe.com
PTFE Rod