Ads by Google
Machining Center Parameter
There are four series of CNC machining center in our company:
CNC Horizontal Machining Center, CNC Vertical Machining Center, CNC High-speed Vertical Machining Center and CNC Miiling Machine.
CNC Vertical Machining Center: MDV55, MDV75,MDV95;
Specifications | Unit | Model | ||
MDV55 | MDV75 | MDV95 | ||
Table(L×W) | mm | 1050×560 | 1550x740 | 2300×950 |
T-slot(Numbers×Width×Distance)(b/t slots) | mm | 18×100×5 | 22×140×5 | 22×125×7 |
Table load Max | kg | 800 | 1500 | 2500 |
The distance from spindle center line to column guide way surface | mm | 615 | 810 | 1100 |
The distance from spindle nose end face to table upper surface | mm | 150~660 | 150~810 | 150~1000 |
X/Y/Z travel | mm | 1020/550/510 | 1530/740/660 | 2060/950/850 |
X/Y/Z guide way type |
| Sliding Guide way | Sliding Guide way | sliding guide |
X/Y/Z rapid traverse speed | m/min | 30/30/20 | 24/24/20 | 20/20/15 |
Feed rate | mm/min | 1~10000 | 1~10000 | 1~10000 |
X/Y/Z servo motor power | Nm | 3.0/3.0/4.0 | 4.0/4.0/7.0 | 7.0/4.0×2/7.0 |
Positioning accuracy | mm | ±0.003(JIS),0.008(VDI) | ±0.003(JIS),0.008(VDI) | ±0.008/±0.005 /±0.005 |
Repeat positioning accuracy | mm | ±0.002(JIS),0.004(VDI) | ±0.002(JIS),0.004(VDI) | ±0.003 |
Spindle motor power | kW | 7.5/11(SPECIAL:11/15) | 7.5/11(SPECIAL:11/15) | 11/15 |
Spindle speed range | r/min | 6000(Second level gear speed)(Special:8000rpm(Second level gear speed,13000rpm MS) | 6000(Second level gear speed)(Special:8000rpm(Second level gear speed,13000rpm MS) | 6000(Second level gear speed)(Special:8000rpm(Second level gear speed,13000rpm MS) |
Spindle taper |
| No.50 | No.50 | No.50 |
Tool magazine capacity/Type |
| 20(Special:30) | 20(Special:30) | 30 |
Tool adaptor type |
| JISB6339 50T | JISB6339 50T | JISB6339 50T |
Max. Tool weight | kg | 20 | 20 | 20 |
Max. Tool diameter/length | mm | Φ110(30Drum:Φ103)/350 | Φ110(30Drum:Φ103)/350 | Φ110(30Drum:Φ103)/350 |
Time of tool change(T-T) | sec | (T-T),5.9(C-C)Speed as per the tool weight | (T-T),5.9 (C-C)Speed as per the tool weight | (T-T),5.9(C-C)Speed as per the tool weight |
Air pressure requirement | MPa | 0.4~0.6 | 0.4~0.6 | 0.5~0.8 |
Net weight | kg | 7500 | 10500 | 20500 |
Machine Height | Mm | 2846 | 3226 | 3662 |
|
|
|
|
|
P.S: Photo provided by its manufacturing company
Tel: +86-13130465353/15541168268
Fax:+86-411-84410129
CNC Machining Center