Ingenious structure, reliable working, long service life and convenient installation and maintenance.

YBLT900 hydraulic torque converter

Hydraulic torque converter is a flexible transmission device with mineral oil as the operating medium and is installed between power engine (such as diesel engine and electric motor) and working machine (such as winch, rotary table and drilling pump), transmits the power of the power engine to the working engine. YBLT900 hydraulic torque converter is a centrifugal turbine torque converter with oil valve and the working chamber diameter of 900 mm, which is matched with G12V190PZL (or CAT3512) diesel engine (see the table) and mainly applied to drilling rig. In addition, it can also be matched with other models of diesel engines and electric motors as an automatic stepless speed-regulation device which is applied to diggers, lifting transportation machinery and dredgers etc.

Features:

(1)Large stall torque ratio and high transmission efficiency to improve working efficiency of drilling rig.

(2)Reduce even eliminate impact on transmission devices of diesel engine and drilling rig to extend service life.

(3)No diesel engine failure in case of pipe sticking or overload.

(4)Even if engine is operating at full speed, operation mechanism of drilling rig (rotary table and drilling pump) can be set in long-time operation at a low speed by changing the oil content of the torque converter.

(5)The torque converter regulates output speed and moment automatically according to variation of outside load to avoid interrupt of output power.

(6)When operation mechanism bears few loads or no loads, the diesel engine operates at a low speed and the torque converter operates with minimum oil content or no oil content to reduce power loss.

(7)Ingenious structure, reliable working, long service life and convenient installation and maintenance.

(8)Good cooling effect to prevent working oil overheat.

(9)Durable due to clearance sealing.

Main technical parameters:

Maximum input power: 1000 kW

Maximum input speed: 1500 r/min

Maximum input moment: 6.5 kNm

Maximum output moment: 38.0 kNm

Maximum efficiency: 85±2%

Working chamber diameter: 900 mm

Oil supply pressure: 0.3~0.47 MPa

Working oil temperature: ≤110°C

Oil products applied: No.6 or No.8 (recommended when the ambient temperature is below -20°C)

Adding quantity of hydrodynamic transmission oil: 260 L

Net weight: 2100 kg

Overall dimensions (length×width×height): 1330×950×1073 mm

YBLT900 hydraulic torque converter