Welcome to ECVERY
lung function tester spirometers and oximeters
lung function tester spirometers and oximeters
Supplier Info
[China Supplier]
Contact Person : Mr. zhud tony
Tel : 0086-574-87782518
Fax : 0086-574-27865218
Product Detail
lung function tester spirometers and oximeters

 lung function tester  spirometers and oximeters           MIT II

FVC, VC with breathing pattern plus MVV tests with real time curves. Over 30 parameters with automatic interpretation and test quality control. PRE/POST bronchial response protocol with F/V loop comparison. Memory for 1500 tests. External printer direct connection

for single patient useHigh accuracy.Easy to replace.Very low cost.Designed for use with MIR spirometers.FlowMIR is factory calibrated.Available in box of 100 pieces.No maintenance No filter No problem.Hygiene 100% guaranteed by single packaging.

Reusable turbine for long term operationHigh accuracyLong term stabilityEasy to clean or sterilize

The proven MIR turbine flow sensor requires no calibration and complies with the severe ATS 24/26 waveforms.

Only 1.9 kg for truly portable spirometry. Rechargeable battery plus mains power. Internal temperature sensor for automatic BTPS conversion.Upgradeable internal software by connecting to the PC.

Silent thermal printer full with spirometric report prints in seconds (112 mm width).

User-friendly keyboard with dedicated function keys plus alphanumeric data entry.

WinspiroPro software turns the Spirolab II into an on-line clinical spirometer with the Flow/Volume curve shown in real time on PC.

PRE-POST bronchial challenge test.FEV1 dose-response curves.Lung Age estimation.

Parameter :

Power supply:

Rechargeable battery and mains power

Temperature sensor:

Semiconductor 0-45° C

Flow/volume transducer:

digital turbine

Flow/volume range:

± 16 Ls-1 / 10 L, BTPS

Volume accuracy:

± 3% or 50 mL

Flow accuracy:

± 5% or 200 mL/s

Dynamic resistance:

<0.8 cm H2O/L/s

Colour display:

FSTN 240x320

Printer/paper:

Thermal, 112 mm width

Mouthpieces:

30 mm external diameter

Serial output:

RS 232, optoisolated

Dimensions:

310 x 205 x 65 mm

Weight:

1,9 Kg circa

Parameters:

FVC, FEV1, FEV1%, FEV6, FEV6%, FEV1/FEV6%, PEF, FEF25-75%, FEF25%, FEF50%, FEF75%, FET, Vext, *FVC, *FEV1, *PEF, PIF, FIVC, FIV1, FIV1%, VC, IVC, ERV, IC, VT, VE, BF, Ti, Te, Ti/Ttot, VT/Ti, MVV

Carryng-case:

included

lung function tester spirometers and oximeters

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.