Ads by Google
1,Laboratory technical index:Temperature of material: 27 °C Temperature of entironment: 27°C Time for froth:0-8S
2,Requirement for spot production :Temperature of material:28-32°C Operating temperature:28-32°C
3,Flame retardant recruitment: you must mix 230KGS/tub combined polyether with 20KGS flame retardant and beat till smooth . You must use it in 7 days.
4,package and stockpilepacked in iron drum : 220kg/tub~240kg/tubcombined polyether must be stock in airtight container in a cool and dry place and avoid the sunshine because it is easily to reactivity with the water.
5,guarantee period : (from it’s production period)three months: temperature:28~32°C Combined polyether is not inflammable and explosive materials , but it must be keep away from food. It’s temperature must be keep low in 25°C .when use it in open container .Once , this produce enter into your eyes or your skin , you must flush with water again and again . YYKlink combined polyether instead of CF50%CF100% become one kind of new combined polyether , it can make your product gain the green mark and enter into international market .This product’s good in it’s capability and adaptability and can largely use in industry . Main purpose: It’s suitable for antisepsis and vacuum in pipeline,refrigeratory,icebox,solar water heater,security door,car(train),battenboard’s produce of urethane foam.
Standard Configuration:
Mainframe: 1 set
Spray gun: 1set
Heating and preserved pipe: 15m
Connecting pipe for spray gun: 1.5m
Max. Pipe length: 45m
Transfer pump: 2 sets
Technical Parameter:
Electrical requirements: 3-phase, 4-line 380v, 50/60Hz, 9Ax3+15A
Air source requirements:0.5~0.8Mpa(70~120psi) ≥ 0.9m3/min
Output: 4~8kg/min
Heating device power for material: 3000w x2(or 4500w x2)
Heating power for pipe heating: 3500w
Single component output pressure: 5~10Mpa (700~1500psi)
The highest heating temperature: 80°C
Shipping Parameter:
Volume: 800x700x1250(mm)
Weight: 157kg
High Pressure Polyurethane Insualtion Painting Machine