Ads by Google
Minco 820B AFM Controller
Control Parameters
1. Analog inputs (20 items):
Three-phase mains supply voltage,frequency, three-phase generator voltage,three-phase
load current, coolant temperature 1, coolant temperature 2, oil pressure 1, oil pressure 2,
oil temperature, fuel level, battery voltage, generator frequency, speed, monitoring input etc.
2. Switch inputs (9 items):
Remote reset, remote start, emergency stop, high coolant temperature, low oil pressure ,
high oil temperature, low fuel level,Acc/Dec limit etc.
3. Relay outputs (8 items) :
Genset supply, mains supply, fuel, start, idle speed normal open (Dec), idle speed normal
close(Acc),pre-fuel (pre-heating), fault etc.
4. Delay settings (23 items):
Remote start ,cranking , cycle crank space,cooling stop,satart bypass, retransfer,warm-
up, no supply to load, transform fault,ETS fuel ,speed monitoring,over speed monitoring,
idle speed (Acc), idle speed(Dec), alarm stop of excessively high coolant temperature,
excessively low oil pressure stop, monitoring input alarm,stop, excessively low battery
voltage alarm, genset voltage over limit stop, genset frequency over limit stop, pre-fuel/
pre-heating ,overload stop etc.
5. System parameters settings (21 items):
Start times, fuel mode, oil pressure sensor kind, coolant temperature sensor kind,
monitoring sensor kind, communication address,low battery voltage reaction, monitoring
input reaction, delivery default, indicator light test, CT rate,speed sensor kind,flywheel
tooth,collant temperature adjustment value, oil pressure adjustment value, monitoring
input adjustment value, phase / line voltage, display transform selecting, language
selecting,backlight control etc.
External Features
1. Dimension: Front panel : (W×H×D 213×153 x8mm
Back panel: (W×H×D199×139x52 mm
Mounting hole(W×H198×138 mm
2. Net weight : 880 g
3. Power Supply : DC8-36 V,power consumption current <300 mA
4. Working environment: -25~70oC, relative humidity <95%
http://www.aliexpress.com/store/706033
Minco 820B AFM Controller