Ads by Google
Deep sea controller DSE720
The Model DSE720 is an Automatic Mains Failure Control Module.The module is used to monitor a mains supply and automatically start a standby generator set.
The module also provides indication of operational status and fault conditions,automatically shutting down the genset and indicating failures by means of an LCD display, and appropriate flashing LED on the front panel.
Selected timers and alarms can be altered by the customer from the front panel.Alterations to the system are made using the 810 interface and a PC.
This interface also provides real time diagnostic facilities.It is also possible to monitor and control the system via PC up to 100metres (111 yards) from the controller.
Easy push button controlOperation of the module is via pushbutton controls mounted on the front panel withSTOP/RESET, MANUAL, TEST, AUTO and START pushbuttons.
The first four pushbuttons feature LED selected indications.
A further pushbutton provides LCD DISPLAY SCROLL function.
DC SUPPLY | 8V to 35V continuous |
CRANKING DROPOUTS | Able to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries. |
MAXIMUM OPERATING CURRENT | 180mA at 12V. 190mA at 24V |
MAXIMUMS TANDBY CURRENT | 145mA at 12V. 150mA at 24V |
GENERATOR INPUT RANGE | 35V(L-N) to 333V AC (L-N) absolute maximum 50Hz - 60Hz (min 15V AC) |
AUXILIARY OUTPUTS | Solid state 2.4A DC at supply voltage |
FUEL/START OUTPUTS | Solid state 3.4A DC at supply voltage |
GENERATOR C.T. | 5A secondary 0.5VA |
MAINS (UTILITY) SENSING INPUT RANGE | 35V(L-N) to 333V AC (L-N) 50Hz - 60Hz (min 15V AC) |
DIMENSIONS | 209mm x 146mm x 30.3mm 8.2” x 5.7” x 1.2” |
PANEL CUTOUT | 182mm x 137mm 7.2” x 5.4” |
MAXIMUMPANEL THICKNESS | 8mm 0.3” |
Relative:
DSE720
DSE5110
DSE5120DSE5210DSE5220DSE501KDSE710
DSE701
DSE702
DSE704
Deep sea controller DSE720