Ads by Google
Washing and drying parts are made of stainless steel.
1)The washing part was welding by stainless steel ,it is high strength and shape will not change ;the top parts made from 12mm thick stainless steel ; the bottom is made from 5mm thick stainless steel ,the lateral is made from 2mm thick stainless steel.
2)OMRON recgonization system for low – E glass, it can know if it is the coating side of the low-E glass.if it is Low_E glass the hard brushes will apert avoid damaging the coating of glass.
3)six anti-temperature brushes, diameter is 180 mm. four sprayer, high speed, glass washing clean, speed is about 10-12m per minute. ( SAIXIN different from others )
4)The spring is stainless steel and can adjust 3-20 mm for different thickness of glass.
5) All part contact water include the axle in the washing machine is stainless steel,copper or waterproof aluminum,nylon and so on, it will not rust for long time running ,and easy to maintain.
6) Gear driving system take chain reaction so it will not leave the original positon after long time runnning.
7) Drying part frame is stainless steel wil not dirty the glass second time.
,the circle wind also down the noise.
8)The circle hot wind down the noice come from the machine.
Vertical Glass Washing Machine LOW-E