Welcome to ECVERY
Extruded Graphite Rod
Extruded Graphite Rod
Supplier Info
[China Supplier]
Contact Person : Ms. Zhou Doris
Tel : 86-411-84357743
Fax : 86-411-84342356
Product Detail
designed for small and medium enterprises, diameter 35-120mm, length 550-2200mm

ApplicationsElectrodes, anodes, cathodes, heating elements, resistors, fluxing/degassing tubes, molds, crucibles, special structural parts, etc. in metallurgy, mechanical engineering, chemical & electrochemical industry, energy management, glass & ceramics, transportation and other industries.

Programmable properties1. Medium and/or fine grain 2. High density and high mechanical strength3. High thermal and chemical resistance4. High resistance to thermal shock5. Proper electrical conductivity Minimum wettability to molten metals and glass

Typical Sizes Diameter (mm) 35,40,45,50,60,75,100,120,150,175,200,250,300 Length (mm) 550 — 2200 Other diameters and lengths are available on request.

Specifications

SpecificationsUnitValue
Bulk Density

g/cm3

1.65-1.80

Compressive Strength *

MPa

20-55

Bending Strength *

MPa

10-30

Elastic Modulus *

GPa

9-21

Specific Resistance *

μ Ω·m

5.0-15.0

Ash

%

0.05-0.5

* Measured in longitudinal direction. ** The values mentioned in this table are only for reference and not committed to any contract.

Extruded Graphite Rod

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.